18/10/2011 – From 18 to 22 October 2011, ARBURG presents at the Fakuma 2011 in Friedrichshafen innovations and a cross-section of its product range with innovative applications.

18/10/2011 – The latest issue of our customer magazine "today" is out now.

Dr. Nils Schmid, Baden-Württemberg’s Minister for Finance and Economic Affairs went on a fact-finding mission at the international MSV machine engineering trade fair in Brno, Czech Republic to gather information on the foreign activities of ARBURG and other Baden-Württemberg companies.

“Higher Institute for Plastics Fabrication” trains skilled workers for Saudi-Arabia

From 3 to 7 October 2011, ARBURG (Hall G1, Stand 33) will present innovative injection moulding solutions at the MSV in Brno. "Our customers are interested in the most efficient part production possible. For the production of technical parts or products for the automotive and electronic industries, hydraulic machines have been widely used up to now. With the highly-efficient electric EDRIVE series we now offer a cost-effective alternative explains Jaroslav Novak, Managing Director of the ARBURG subsidiary in the Czech Republic.

As part of the “Innovations on Tour” series, Hasco paid a visit to cooperation partners ARBURG on 14 July, presenting its range of services for standards and hot runner technology. ARBURG demonstrated the advantages of electrically-driven injection moulding machines. The focus was on the topics of efficiency and innovation.

“For ARBURG, the Chinaplas 2011 in Guangzhou was a thoroughly successful and productive trade fair,” said Managing Director Sales, Helmut Heinson. He added that the two exhibits fully coincided with the interests of the trade visitors and also demonstrated the range of the ARBURG machine offerings.

For the ARBURG subsidiary in São Paulo, the Brasilplast was the most important public appearance in Latin America this year. Numerous trade visitors, particularly from the booming packaging industry, showed interest in the injection moulding machines “Made in Germany”.

At the Plastpol, to be held in Kielce from 24 to 27 May 2011, ARBURG will be presenting a selection from its current product range:

At the FIP fair, which will take place from 24 to 27 May 2011 in Lyon, ARBURG will impressively demonstrate the performance capabilities of its electric and hybrid ALLROUNDER machines.

02/05/2011 – During this year’s Chinaplas in Guangzhou, at exhibition stand No. A41 in Hall 5.1, ARBURG will present an example of its HIDRIVE hybrid machine series, which is characterised by high productivity, short cycle times and energy efficiency. This potential will be impressively demonstrated by a large ALLROUNDER 720 H with a clamping force of 3,200 kN and size 2100 injection unit, featuring a high-speed, thin-walled application from the packaging sector. Furthermore, a hydraulic ALLROUNDER 470 C GOLDEN EDITION machine will be presented, which combines high-tech with an attractive price.

30/03/2011 – The injection moulding sector is booming again, as the Technology Days 2011 clearly confirmed: Record numbers of visitors, an excellent atmosphere and numerous intensive and project-related technical discussions. More than 5,200 trade visitors from 54 countries came to the ARBURG headquarters in Lossburg between 23 and 26 March 2011 in order to take a close look at the machine manufacturer’s current range of products and services. Some 40 percent of visitors came from outside Germany. The largest groups counted 160 participants and came from France, Switzerland and the US respectively.

29/03/2011 As a company devoted to energy efficiency in thought and action, ARBURG annually bestows an award to a customer who places particular emphasis on energy efficiency in its philosophy and activities. On 22 March 2011, the LEGO Group was delighted to receive the ARBURG Energy Efficiency Award, which has become firmly established and well recognised within the sector. During a ceremony, the award was presented to a high-ranking delegation from the Danish company.  
 

27/01/2011 – The traditional Technology Days are being held this spring from March 23 to 26. For four days a unique mix of technology, know-how and advice will be presented to the participants from all over the world. In addition, the anniversary "50 years of ALLROUNDER" is being celebrated.

From 24 to 27 May, ARBURG will present an automated solution for efficient injection moulding at the 2011 International Engineering Fair (IEF) in Nitra, Slovakia.

From 9 to 13 May 2011, Arburg will present solutions for efficient injection moulding at the Brasilplast exhibition in São Paulo.

At the Medtec, which will be held in Stuttgart from 22 to 24 March 2011, ARBURG will present a compact innovative clean room solution on stand 8231 in Hall 8.

 ARBURG exhibited very successfully in Dubai from 8 to 11 January 2011.  With a high-speed, thin-walled application, the high-performance ALLROUNDER HIDRIVE machine was a real crowd-puller and the highlight of the Arabplast 2011.

At the leading world trade fair, the K 2010 in Düsseldorf, ARBURG presented new products from its machine, control and robotic system ranges.

ARBURG exhibits a representative of its high-performance ALLROUNDER HIDRIVE machine series at the Arabplast in Dubai from 8 to 11 January 2011. 

In November 2010, the IXth Delphi Convention was held in São Paulo. The leading global supplier of mobile electronics and transport systems for the automotive sector bestowed the award on the Brazilian ARBURG subsidiary for its role as an outstanding supplier in South America.

28.10.2010 – The international plastics industry meets from October 27 to November 3, 2010 at the K in Düsseldorf, Germany. In Hall 13, booth number 13 ARBURG presents its latest products and services.

27.10.2010 – ARBURG presents itself as strong partner for efficient injection moulding by showcasing various innovative machines and powerful applications at the K 2010 in Düsseldorf, Germany. 

On 15 September 2010, the Brazilian subsidiary celebrated its ten-year anniversary. Managing Partner Renate Keinath and Managing Director Sales Helmut Heinson took part in the celebrations.

On June 24, Michael Hehl, Managing Partner of ARBURG, inaugurated the new building in Budapest. This was followed by an open-house event the next day in the ARBURG Technology Center (ATC).

With our new ARBURG PIM Newsletter, you receive first-hand news regarding the field of powder injection moulding (PIM).

From the idea to the finished product / ARBURG has provided the Süddeutsche Kunststoff-Zentrum (SKZ) in Würzburg with an injection moulding machine for the newly opened students’ laboratory.

ARBURG used a hybrid injection moulding machine in combination with a robotic system to present a cost-effective entry-level solution for automated parts production at the International Engineering Fair (IEF) in Nitra.

At the Plastpol fair, the compact and highly flexible production cell featuring a vertical ALLROUNDER 375 V with a Kuka-six-axis robotic system, as well as the ALLROUNDER 570 H, on which a thin-walled packaging item was produced in a cycle time of only 2.2 seconds, both impressively demonstrated the potential of ARBURG injection moulding soultions for the Polish market.

ARBURG presented itself mainly as a general contractor for complete systems aimed at producing hybrid components.

Twenty-five years since opening of first Arburg subsidiary in France / Anniversary celebrations in Aulnay-sous-Bois on 15 June

Since June 2010, ARBURG has been represented by a fully-owned organisation in the Austrian market. The headquarters is located in Vienna, but the sales and service personnel work in the field. They thus not only have direct contact to their respective customers in the Alpine republic, but are also available at very short notice.

At the Technology Days 2010, ARBURG launched its new micro-injection module, which operates with an 8-mm injection screw. This is combined with a second screw, which is responsible for melting the material.

High-speed machines and automation solution impress visitors

Due to its big success by the end of 2009 at the global headquarters in Lossburg, Germany the "Practical Automation Forum" will be offered in 2010 on a global scale. During many of these events – now held at ARBURG subsidiaries and trading partners – ARBURG customers and interested parties can experience and test for themselves how easy the SELOGICA controller allows for the programming of complex automation sequences. In addition specialist presentations are offering interesting insight into practical tasks. Presentations on the comprehensive ARBURG product range round off the events.

At Chinaplas, held April 19 - 22, ARBURG showcases two interesting exhibits at their booth G21 in Hall E1.

21/03/10 – The number of more than 4,100 visitors from 46 countries impressively demonstrates that ARBURG has established with its Technology Days – held at the main factory in Lossburg, Germany – a truly prestigious industry event for the international plastics world.

22.01.10 – The traditional Technology Days are being held this spring from March 18 to 20. In 2010 the complex topic of “Efficient manufacturing” is at the core of the three day event which draws each year anew thousands of international visitors to the headquarters in Lossburg, Germany. The Packaging Technology Forum.has been added as a new feature to the event.

19/03/2010 – This year’s ARBURG Energy Efficiency Award was presented for the first time as part of the Technology Days event at ARBURG’s headquarters. The prize, which is awarded in recognition of special activities in the area of energy efficiency, was presented to Wild & Küpfer AG from Schmerikon, Switzerland. This family-run company develops, produces and assembles high-precision plastic parts and assemblies for international customers from a variety of high-tech industries, such as medical technology.

At the Plastimagen, which takes place from 23 to 26 March 2010 in Mexico City, ARBURG will demonstrate the potential of its ALLROUNDER H (HIDRIVE) high-performance hybrid machines.

At the Interplastica in Moscow, ARBURG impressively demonstrated the performance potential of its GOLDEN EDITION machine series with the cost-effective production of overcaps.

At Swiss Plastics 2010, ARBURG demonstrated the high-precision production of optical waveguides with microstructures.

At the 13Interplastica, which will take place from 26 to 29 January 2010 in Moscow, ARBURG (Forum Hall, Stand FC 43) will be represented with a hydraulic ALLROUNDER 420 C GOLDEN EDITION.

ARBURG celebrated the five-year anniversary of its foundation in conjunction with an Open House event held on 27 November 2009.

01/12/09 – A very special event will take place from 14 to 18 December 2009 at the ARBURG headquarters in Lossburg: The Automation forum offers the unique opportunity to explore and understand just how easy the programming of complex, automated sequences is using our SELOGICA control system.

ARBURG presented its state-of-the-art injection moulding technology extremely successfully with two high-performance ALLROUNDER H (HIDRIVE) hybrid machines at the Plast Avrasya, which took place from 19 to 22 November 2009 in Istanbul.

The new Danish subsidiary manager, Lars Nygaard, was formally presented to 120 invited guests during an Open House event in Greve. The personnel change will become fully effective from 1 January 2010.

ARBURG's Spanish subsidiary in Sabadell (Barcelona) invited visitors to a very special open house event: the "Automation Allround" day, attended by 56 customers from renowned Spanish companies.

23/10/09 – ARBURG's presence at Fakuma 2009 was a success. The main focus on energy efficiency and sector-specific solutions attracted a great deal of interest from trade visitors and was perfectly in tune with the current requirements of the injection moulding industry. As hoped, the Fakuma struck a positive note for the future.

13/10/2009 - The ARBURG Energy Efficiency Award 2009 was presented on the evening of the first day of the Fakuma trade fair. The award for special efforts in the area of energy efficiency went to Tyco Electronics. The internationally active group of companies is among the world’s leading manufacturers of electronic components, network solutions, undersea telecommunications systems and special solutions.

ARBURG will be presenting state-of-the-art injection moulding technology with the high-performance ALLROUNDER H (HIDRIVE) at the 19th Plast Avrasya, taking place from 19 to 22 November 2009 in Istanbul. At exhibition stand no. 218 in hall 2, trade visitors will be able to see for themselves the potential of the new ALLROUNDER H with an automation solution from the automotive sector as well as a high-speed thin-walled application from the packaging sector.

As in previous years, ARBURG again set standards in 2009 at the MSV in Brno and, with its two high-tech exhibits, demonstrated future trends in the injection moulding industry: energy-efficient, high-performance machines and automation solutions with which moulded parts can be produced cost-effectively and in the highest quality.

The injection moulding technology of the future will be presented by ARBURG at the 51st International Engineering Fair MSV, to be held in Brno in the Czech Republic from 14 to 18 September 2009.

10 July 2009 was the date of a very special event at ARBURG’s Swiss subsidiary in Münsingen.

At the beginning of July, ARBURG’s Spanish subsidiary invited customers and interested parties to Valencia to attend the “Packaging Allround” seminar.

08/07/2009 - ARBURG presented its extensive powder injection moulding (PIM) range at the PowderMet in Las Vegas (NV) and was extremely satisfied with outcome of the three-day trade fair. The specialist presentation on the universal stamping process by Uwe Haupt, who is responsible for sales in the PIM segment at ARBURG, was particularly well received by visitors.

07/07/2009 - In the context of the International Rubber Conference (IRC) trade fair, ARBURG demonstrated its comprehensive competence in the field of multi-component injection moulding. An elastomer/thermoplastics application was presented for this purpose. The exhibit comprised an automation solution built around an energy-efficient electric ALLROUNDER 470 A with two horizontal injection units in an L-configuration and a vertically-operating MULTILIFT V robotic system.

“We were very pleased with the outcome of the NPE. Our exhibition stand was well frequented on all five days of the exhibition and the quality of the discussions was extremely high,” summarised Friedrich Kanz, Manager of ARBURG’s North American subsidiary.

ARBURG’s Czech subsidiary held its open-house event on 18 and 23 June 2009 under the title “Cost reduction in the production of plastic components”. A total of 165 customers and visitors from a variety of companies attended the event on both days. As well as specialist presentations, there were also live demonstrations of various ALLOUNDER models in the demonstration room. The highlight of the event was the presentation of an automated high-performance machine from the new HIDRIVE series.

ARBURG’s British subsidiary placed energy efficiency at the top of the agenda during an open-house event held on 16 June 2009. 32 representatives from different industry sectors attended where, in addition to a number of specialist presentations, energy-efficient machine concepts and specific energy measurement processes were presented.

The ARBURG stand with its two high-tech exhibits was a great attraction for visitors to the Lyon fair. The reason for the interest was an electric ALLROUNDER 570 A with a high-speed packaging application and a complex production cell built around a hydraulic ALLROUNDER 370 S.

Trade visitors were highly impressed with the two ARBURG exhibits at the Plastpol: the electric ALLROUNDER 420 A convinced with a high-speed, thin-walled application with an outstanding cycle time of only 2.2 seconds.

ARBURG was more than satisfied over the outcome of this year’s Chinaplas exhibition. Despite worldwide difficult situation, the interest of high-end injection moulding technology was large.

In the context of the International Rubber Conference (IRC) trade fair to be held from 29 June to 2 July 2009 in Nuremberg, ARBURG will demonstrate its competence in the field of multi-component injection moulding at stand no. 207 in Hall 12.

At the French FIP trade fair in Lyon, to be held from 16 to 19 June 2009, ARBURG will present its performance spectrum and the latest injection moulding trends in the fields of high-speed applications and automation with two exhibits

ARBURG will be represented with six exhibits and a stand area of over 500 square metres at the NPE in Chicago from 22 to 26 June 2009. On exhibition stand no. 46048 in Hall A (South Building), the company will provide clear evidence of its performance spectrum and its competence in the field of cost-efficient high-tech solutions.

ARBURG trading partner Rafo was extremely satisfied with the outcome of the Elmia Polymer exhibition. The exhibits presented were the new electric ALLROUNDER 270 A, which produced a precision moulded part, and a complex production cell built around a hydraulic ALLROUNDER 370 S, which demonstrated the encapsulation of inserts and the integration of downstream assembly steps.

The ARBURG subsidiary in Sao Paulo was extremely satisfied with the outcome of the Brasilplast fair. Injection moulding experts from around the South American region were amazed by the high performance of the ARBURG machines on show.

At Plastpol in Kielce, Poland, from 26 to 29 May 2009, ARBURG will present two innovative exhibits on stand G-25 in Hall G: firstly, a cost-efficient automation solution comprising an ALLROUNDER 470 C GOLDEN EDITION and MULTILIFT V SELECT robotic system; secondly, an electric ALLROUNDER 420 A with a high-speed thin-walled application.

From 19 to 22 May 2009, ARBURG will present its current machine range at the International Engineering Fair in Nitra, Slovakia. In Hall M4 on exhibition stand no. 35, covering approximately 70 m2, a hydraulic ALLROUNDER 570 C GOLDEN EDITION with MULTILIFT V Select will be demonstrated.

On stand no. A07:82 in Hall A at the Elmia Polymer, which will take place from 5 to 8 May 2009 in Jönköping, Sweden, ARBURG will be presenting its range of products and services as well as future trends in injection moulding with two exhibits.

ARBURG presented its extensive range of powder injection moulding (PIM) solutions to trade visitors at the PM Asia in the Everbright Convention Centre in Shanghai.

From 4 to 8 May 2009, ARBURG will be represented with two ALLROUNDERs at the Brasilplast in Sao Paulo.

Dassault Systèmes are one of the leading global suppliers of 3D and Product Lifecycle Management (PLM) Solutions. They are exhibiting at this year's “Hannover Messe Industrie“ from 20 to 24 April 2009 (hall 17, stand C 40). The company cites ARBURG as an example of how medium sized engineering companies can benefit from an integrated PLM platform.

The ARBURG Technology Days are the must-see industry gathering of the international plastics industry and attracts several thousand of customers and prospects to the ARBURG headquarters in Lossburg, Germany each springtime. This was again proven by more than 4,000 visitors from 48 countries. The event's 2009 highlights were the new Customer Center, the new models of the electric machine series ALLROUNDER 270 A and 720 A, the all new series ALLROUNDER H (HIDRIVE), several complex production cells and the overall broad range of applications on display.

ARBURG ‘handed over’ the new Customer Center at its headquarters in Lossburg to its customers by mid of March. A first opening event – with all contracting companies involved – was followed with the official opening ceremonies in the presence of German and international customers. Adjacent ARBURG opened its doors for the traditional ARBURG Technology Days to present to over 3,000 trade visitors from all over the world the latest ARBURG technology as well as the all new Customer Center.

At the Plast 2009, which will take place from 24 to 28 March in Milan, ARBURG will present an impressive cross-section of its current product range with groundbreaking applications.

Demand for high-tech machines is growing in China. In response, ARBURG has chosen three special exhibits for the exhibition stand no. D 15 in Hall 5.1 at the Chinaplas show, which will be held from 18 to 21 May 2009 in Guangzhou

From 6 to 8 April 2009, ARBURG will be presenting its extensive powder injection moulding (PIM) range to Chinese trade visitors on Stands B15 & B16 at the PM Asia in the Shanghai Everbright Convention Center.

From March 19 to 21, 2009 the traditional ARBURG Technology Days will be held at the company’s headquarters in Lossburg, Germany. This event attracts each year anew thousands of international visitors.

At the Plastindia ARBURG will present a machine of its successful machine series: The ALLROUNDER 420 C GOLDEN EDITION features a clamping force of 1,000 kN and operates with a size 290 injection unit.

At the Interplastica 2009, which is held from 27 to 30 January in Moscow, ARBURG presents two machines at its stand no. FC43 in the Forum Hall: An electric ALLDRIVE machine shows its capabilities in the field of high-speed applications. Two cups, each weighing 8.2 grams, are produced on the ALLROUNDER 420 A with a clamping force of 1,000 kN in a cycle time of 2.2 seconds and subsequently removed and stacked. The second exhibit is an ALLROUNDER 420 C GOLDEN EDITION.

Since 1 January 2009, ARBURG has been officially represented in the United Arab Emirates (UAE) with its own sales and service office. The Arabplast, which took place from 10 to 13 January in Dubai, provided the ideal forum for presenting the new ARBURG organisation and ALLROUNDER technology to the Arabian trade public.

At the Fakuma 2008 the ALLROUNDER GOLDEN EDITION was presented with a MULTILIFT V SELECT for the first time. With this new combination ARBURG offers a complete production unit including guarding with all electrical connections, conveyor belt and CE certification.

The newly established ARBURG Energy Efficiency Award was presented for the first time on 14 October 2008 as part of the Fakuma. The prize, which is awarded in recognition of special efforts in the area of energy efficiency, was presented to WAGO Kontakttechnik in Minden. The exclusive event was attended by around 40 invited guests. Michael Hehl, Managing Partner and Spokesperson for the ARBURG Management Team, presented the award to WAGO’s Managing Director Ulrich Bohling.

Default Shorttext

ARBURG will present all facets of our innovative injection moulding technology with ten exhibits at the Fakuma show in Friedrichshafen from 14th to 18th October 2008. The main focus of our stand will be energy efficient injection moulding production and innovations in the field of robotic systems.

The ARBURG range features a number of vertical machines especially designed for the encapsulation of inserts.

16.06.2008 – "The Proform premiere went very well for us. The quality of dicussions was very high since this exhibition is being attended by trade visitors only", concludes Eberhard Lutz, ARBURG Director Sales Germany. "Through the consolidation of two branches we were able to make new contacts at Proform. Therefore this new trade fair vey well complements our activities in North Rhine-Westphalia and Northern Germany."

12/06/2008 – ARBURG communicates the subject of energy efficiency to the world using a truck, open houses and seminars

03/06/2008 – ARBURG impressively demonstrates the high performance of its injection moulding machines and its expertise in the field of plastic/metal combinations at the very first Proform trade fair, to be held in Dortmund from 10 to 13 June 2008.

21/05/2008 – At the Chemexpo, which is taking place this year in Budapest from 27 to 30 May, ARBURG exhibits as representative of its entire machine range one of the large ALLROUNDER machines on Stand 4 / B in Hall B.

21/05/2008 – At this year’s Plastpol, which takes place in Kielce in Poland from 27 to 30 May, ARBURG demonstrates three exhibits on its representative stand B 30 in Hall B.

From 20 to 23 May 2008, ARBURG presents a high-speed thin-walled application at the International Engineering Exhibition 2008 in Nitra, Slovakia.

ARBURGs participation at the Chinaplas was an allround success. With four machine’s on demonstration, the trade visitors could gather valuable information on the ARBURG machine series. A broad spread of applications was impressively demonstrated by the performance and flexibility of the ALLROUNDER machines.

The new ARBURG subsidiary in Mexico presented itself for the first time to a bigger audience at Plastimagen, held from April 8 to 11.

Customers from all over the world bring technology and application highlights to Lossburg.

04/04/2008 – ARBURG has defined the efficient use of energy as a corporate objective in 2008. All measures are now being brought together with the “Energy Efficiency Allround” initiative. ARBURG envisages a holistic approach to the efficient use of energy. The goal is not simply to produce the products using as little energy as possible, but rather to use our products and our expertise to efficiently minimise energy consumption among our customers as well.

07/04/2008 – The world of plastics has come together at ARBURG: with more than 4,100 visitors, this event has exceeded all expectations.

ARBURG will be exhibiting at the Chinaplas in Shanghai from 17 to 21 April 2008. On exhibition stand no. G21 in Hall E1, trade visitors will be impressed by the performance and versatility of the ARBURG machines, as demonstrated by the four exhibits. An electric ALLROUNDER 420 A, a hydraulic ALLROUNDER 320 S, a hydraulic ALLROUNDER 420 C GOLDEN EDITION and the ALLROUNDER 275 vertical machine will be presented. The wide range of applications includes the medical technology, optics and automotive sectors as well as the encapsulation of inserts.

ARBURG will present itself in two senses of the word at the Plastimagen, which will be held in Mexico City from 8 to 11 April 2008. On the one hand, ARBURG’s new Mexico subsidiary will celebrate its debut. On the other, trade visitors will be able to gain an impression of the high performance of ARBURG’s products. At the ARBURG exhibition stand, No. 300, a hydraulic ALLROUNDER 470 C GOLDEN EDITON will produce a moulded part for the medical technology sector.

On 21 February 2008, ARBURG opened its new American Technology Center California in Irvine, CA, in the presence of ARBURG’s Managing Partners, Juliane and Michael Hehl.

25/02/2008 – Take the unique opportunity to find out more about the latest developments in technology and trends within the injection moulding industry at the Technology Days in Lossburg from 3th to 5th April 2008.

On their premiere of the first Swiss plastics fair, “Swiss Plastics”, at the Lucerne Allmend Exhibition Centre from 15 to 17 January 2008, ARBURG exhibited an ALLROUNDER 420 A 1000-400. The representative of the electric ALLDRIVE series successfully demonstrated its advantages in the field of high-speed applications. The response of the trade visitors to the ARBURG stand presentation was thoroughly positive.

Since 1 January 2008, ARBURG has been represented in Mexico by its own subsidiary – ARBURG S.A. de C.V. – thus giving due recognition to the enormous potential of the Mexican market. This move is partly the result of the increased presence of international global players who are stepping up their production in Mexico, as well as the ever-higher quality demands made by the Mexican customers.

The new premises of the ARBURG subsidiary in Shanghai were officially opened during an inaugural celebration held on 6 December 2007. As a representative of the ARBURG parent company, Helmut Heinson, Managing Director Sales, welcomed some 150 guests.

Large celebrations were held on 5 and 6 December 2007 at ARBURG’s Danish subsidiary.On the first day, ARBURG Partners Eugen, Juliane and Michael Hehl were in Greve, with numerous invited guests in attendance, in order to officially open the new premises and to congratulate Subsidiary Manager Eddie Oswald and his team on the ten-year anniversary of ARBURG’s Danish subsidiary.The following day, numerous visitors attended the open day in order to see the new premises at Greve.

On the occasion of the world trade fair K 2007, which took place from 24 to 31 October in Düsseldorf, ARBURG has launched new products.

24/10/2007 – Plastic world meets at K in Düsseldorf / Germany: From 24 to 31 October ARBURG presents in hall 13, stand A 13, new products.

22/10/2007 – By cooperation of IB STEINER and ARBURG, the new technology EXJECTION is now available for ALLROUNDERs.

On October 4, 2007, ARBURG opened its new Technology Center Midwest.

Das zehnjährige Jubiläum der Partnerschaft von ARBURG und seinem slowenischen Handelspartner TERA war der Anlass, zweitägige Technologie-Tage bei TERA durchzuführen. TERA Geschäftsführer Marjan Leban konnte mehr als 50 Besucher an beiden Tagen zu einem informativen und abwechslungsreichen Programm begrüßen.

Transtech, ARBURG’s trading partner in Russia since 2001, celebrated the inauguration of its newly-occupied business premises on 27 and 28 September in an extremely pleasant atmosphere. Some 100 guests from all over Russia and Belarus

On 1 July, the newly sealed partnership between ARBURG and Edstachem (M) Sdn Bhd was made official: The Malaysia-based holding company will assume comprehensive sales and service activities for the Lossburg injection moulding machine manufacturer via its two subsidiaries in Vietnam. ARBURG is extremely pleased about the conclusion of this contract as Vietnam is a highly interesting, albeit demanding market to develop.

On 14 and 15 June, ARBURG celebrated the 25th anniversary of the ARBURG Technology Center (ATC) in Radevormwald (Germany). 341 invited guests congratulated on the silver anniversary and celebrated this in the context of the anniversary in-house exhibition.

The week after Chinaplas' close, ARBURG is very happy with the positive results. The feedback of the numerous visitors, who visited the ARBURG booth, was overwhelmingly positive as well. With all four exhibits, the capability of the hydraulic and electric ALLROUNDERs was perfectly demonstrated.

In recognition of their life’s work and their outstanding services to the plastics industry, the American Society of Plastics Engineers (SPE) has awarded the Business Management Award for 2007 to the two ARBURG Managing Partners Eugen and Karl Hehl. The prize-giving took place on 6 May during an evening reception, at the Millennium Hotel in Cincinnati/Ohio, which was held on the occasion of the SPE Annual Technical Conference (ANTEC).

In 2007, ARBURG will once again be present with added exhibition space at the Chinaplas. From 21 to 24 May, four ALLROUNDERs will be exhibited at the company’s 186-square-metre exhibition stand. ARBURG will be presenting the new Allrounder 275 V vertical machine for the first time outside Germany at stand 1B322.

The Brasilplast was very successful for ARBURG. The feedback of the 3.500 visitors, which visited the ARBURG stand, was overwhelmingly positive. With the two exhibits, ARBURG impressively demonstrated the performance of the hydraulic and electric ALLROUNDER machines in the packaging sector. On the hydraulic ALLROUNDER 570 C GOLDEN EDITION, 24 screw caps were injection-moulded. The application from the field of in-mould labelling (IML) was an absolute highlight: On an electric ALLROUNDER 570 A, which was equipped with peripherals from Wittmann and a four-cavity mould, 300-millilitre cups were produced. The overall cycle time was of 4.8 seconds, including insertion of the film.

On 28 March 2007, the official ground-breaking ceremony for the new ARBURG Customer Centre was held in Lossburg. At the heart of the new building will be a show room, which offers sufficient space to house the entire machine series. “With this new building, we confirm our strong commitment to Lossburg as our sole production location,” said Michael Hehl, Managing Partner and Spokesperson for the ARBURG Management Team in his welcoming speech.

22/03/2007 – Technology Days at ARBURG and the international plastics sector follows ARBURG's invitation. More than 3,600 registered visitors from all over the world, including Indonesia, North America and Brazil, have the exclusive chance of gaining a comprehensive impression of ARBURG's products and service.

07/02/2007 – Take the unique opportunity to find out more about the latest developments in technology and trends within the injection moulding industry at the Technology Days in Lossburg from 22 to 24 March 2007.

At the Interplastica 2007, which will be held from 30 January to 2 February in Moscow, ARBURG will be represented in the Forum Hall, Stand number FC 41, with two machines demonstrating how sophisticated technical parts and processes can be efficiently implemented in operational practice using ALLROUNDER machine technology. A high-speed application for producing a thin-wall part will be run on an electric ALLROUNDER 320 A 600-170 and a conventional insert will be produced on a hydraulic ALLROUNDER 175 V 125-70.

15/01/07 - With the start of 2007, ARBURG has changed its current representative office in Indonesia into an independent subsidiary. This step represents a strategic response to ongoing market growth in the region. The new subsidiary manager is Christianto Adisuhanto, who has been with ARBURG since 2002 and who previously managed the representative office.

22/12/06 - “Allrounder International” is the new annual slogan for the K trade fair 2007. The slogan is emblematic of the commitment behind the high-tech services of ARBURG, a global player with strong regional ties. Allrounder refers not only to ARBURG’s machines, but also to the worldwide activities of its highly qualified staff. The slogan “Allrounder International” thus carries the appropriate message of competence in terms of both machine technology and individuals, in all languages and in all markets.